10 Port POE Network Switch - 8+2 100Mbps with 48V Power Supply
Power Your Network & Devices in One Shot
Stop running separate power cables to every access point and IP camera. This 10-port POE switch delivers both data and power over a single Ethernet cable, making it the clean, efficient backbone for home networks, small offices, CCTV setups, and wireless AP deployments. With 8 POE-enabled ports plus 2 uplink ports, it handles the lot.
Key Features
- 8 POE Ports + 2 Uplink Ports — power and connect up to 8 POE devices simultaneously via standard Cat5e or above cabling
- IEEE 802.3af/at Compliant — 15.4W or 30W per port, compatible with IP cameras, wireless APs, VoIP phones, and more
- Up to 200m POE Range — extend power and data up to 200 metres for hard-to-reach installations
- 2.0Gbps Backplane Bandwidth — non-blocking architecture for smooth, uninterrupted network traffic
- Store-and-Forward Switching — error-free packet forwarding for reliable network performance
- Auto MAC Learning & Aging — intelligent address management with power supply priority mechanism
- Full & Half Duplex Flow Control — IEEE 802.3x full-duplex and backpressure half-duplex support
- 48V External Power Adapter Included — AC 220V input, 48V/3A output; total power consumption ≤150W
Perfect For
- Wireless access point (AP) deployments
- IP security camera (CCTV) installations
- Small office and home network setups
- VoIP phone systems
- Any POE-powered device network
Technical Specifications
- Model: ZWD-8+2BZDW
- Ports: 8× POE (IEEE 802.3af/at) + 2× Uplink Ethernet
- POE Output: 15.4W / 30W per port
- POE Range: ≤200m
- Network Standards: IEEE 802.3, 802.3u, 802.3x, 802.3af/at
- Network Medium: Cat5 or above UTP
- Signal Distance: ≤120m
- Backplane Bandwidth: 2.0Gbps
- Forwarding Rate: 14,880 PPS (10Base-T) / 148,800 PPS (100Base-TX)
- MAC Address Table: 2K
- Power Supply: External adapter — AC 220V in, DC 48V/3A out
- Max Power Consumption: ≤150W
- Operating Temp: 0℃ – 40℃
- Operating Humidity: 10% – 90% RH (non-condensing)
This product is subject to the True Technology Warranty Policy.
It work fine 2.5g
It work with spf+ 1g adapters
It work very unstable with 10g qlogic 8200/8300 adapter using direct cooper cables.
Evan using 0.5m long cable still make permanent restarting connection.
I'm using hp nc523sfp device. This device does not support autonegotiation - this could be reason?
Whit other similar switch (zx-k0402ws) i don't have such problem.
The Ethernet switch is very fast, the SFP ports allow speeds up to 10G, and the 2.5G ports are very efficient.
Unlike the product description, there is no management function.